Skip to Main Content
Skip to main content

Microforms at the Murray Library: Scanner/Printer Problems & Solutions

Using the Scanner Q&A

After loading microfilm the movement controls don't work.
   Manually roll the film on the right-side wheel a few turns and try again.

I'm moving the scanner tray but not seeing any movement on the screen.
   Close the PowerScan program and open it again.

What does ______ button do?
   Hovering the cursor over a button will display its name.
   Clicking on the Help [green arrow & yellow question mark] button and then the desired button to display a Help description for that button.

When I rotate the image [using the Rotate Digital button] it only uses half the screen.
   Click the Film Orientation [camera] button to see the full screen again.

Loading Microform Q&A

How do I load microfilm?
   Start by opening the PowerScan program. Next pull the tray all the way towards you, lifting the top glass plate. A guide will appear on the screen showing the method and direction to load film. See a helpful video on the Scanner/Printers & Readers page.

After loading microfilm the movement controls don't work.
   Manually roll the film on the right-side wheel a few turns and try again.

Printing Q&A

There are four printers to choose from. Which one should I use? [NSID scanners]
   Two printers will have the letters BW in their names. These are the black and white options at $0.10/page. The other two have the word COLOUR and will print at $0.25/page. Printer #1 is located beside Room 134, while printer #2 is closer to the IT Support Service Desk.

Where does the Public Use scanner print to? [Public scanner]
   It prints to the Check-out Desk on the Ground Floor. Stop at the desk to pick up and pay for your print jobs.

How much does printing from the Public Use scanner cost? [Public scanner]
   $0.10/page. Only black and white is available.

 

Saving Q&A

How do I save more than one scan to a single PDF file?
   When saving the first page, in the "Save as type:" drop-down box change "PDF" to "PDF (multipage)". A small window will appear in the lower left of the screen displaying a page count and a "Finish" button. Continue to save new pages with the save button and click "Finish" on the small window to save/complete the file.

I saved a file to the computer. Where did it save? [NSID scanners]
   By default the scanners save to your Cabinet drive, in the My Documents folder.